02-13-2022, 01:24 AM
Eco-solvent inks have their colours suspended in a mild biodegradable solvent, which means that the ink has virtually no odour as they don’t contain as many volatile organic compounds. They’ve been around since the early 2000s and originally were designed for general signage work.
The lack of smell is a real plus point for eco-solvent inks. In some solvent inks not only do you get a strong smell during the printing process, meaning you need to consider the placement of your Ecosolvent Printer, but they can also leave an odour on the printed material itself. This can rule out printing onto material which will be displayed or used indoors.
Finally, you’ll need to check what type of ink is compatible with your large format printer. If you know from the outset that you wish to use eco-solvent inks, you need to ensure that they are compatible with your Eco Printer.
How Does the Sublimation Process Work?
Just like any printing process, sublimation starts with the design stage. Coming up with a good design is crucial since the chosen image on the computer is the one that will reflect on the final print.
The design is then printed on a heat transfer paper, also known as sublimation paper. This paper is explicitly used for the transfer of the image when exposed to heat. A sublimation paper uses CMYO colors. Hence, the Sublimation Printer used must also accommodate the same. Luckily, most of the modern printers can alternate between the CYMK and CMYO colors.
It is evident that the “next big thing” in the personalization world is UV printing, but what makes it so great? What can you do with a UV Printer that you can’t do with sublimation or some other color printing method? And finally, is the equipment worth the price?
Before answering this, I should clarify for the benefit of newbie readers what this is. A UV inkjet printer is a lot like the inkjet printers we use to print documents in the office. The main difference is they are designed to print on other substrates besides paper, plus they use a UV light source to cure the inks after they are deposited onto the item/substrate.
I’ve been using a UV printer for a couple of years now and I think I have discovered a fair share of the good and bad points of the process.
First, the bad points: Two come immediately to mind. One is that these printers don’t print on everything. Although some salespeople may make it sound that way, the truth is, there are countless products just begging for UV images but the inks won’t adhere properly. It does print on most things, especially if you use an adhesion promoter. This is usually a liquid that can be applied with a paper towel prior to printing. A couple of UV Roll To Roll Printers on the market actually allow you to install the promotor like an ink allowing you to “print” the liquid prior to printing the ink. Although this may sound like a good idea, I question the wisdom since this would require relinquishing one or two nozzles for this purpose. I would much prefer having those nozzles available for white or clear inks.
Note, too, that dishwashers and microwaves are death to most UV printed items. Although a couple of ink companies are said to be working on inks that will withstand the rigors of a dishwasher, current inks that I’ve seen just can’t cut it. This doesn’t eliminate printing on cups and glassware but it does require a warning label at the very least.
Second, as I have pointed out in previous articles on this subject, these printers require a lot of attention compared to most of the other equipment you might have in your shop. Lasers, rotary engravers and sublimation equipment all stand maintenance free when not in use but this is not the case with a UV Flatbed Printer. I have made a rule that I print something every single day, without fail, to keep the heads clear of clogs.
The lack of smell is a real plus point for eco-solvent inks. In some solvent inks not only do you get a strong smell during the printing process, meaning you need to consider the placement of your Ecosolvent Printer, but they can also leave an odour on the printed material itself. This can rule out printing onto material which will be displayed or used indoors.
Finally, you’ll need to check what type of ink is compatible with your large format printer. If you know from the outset that you wish to use eco-solvent inks, you need to ensure that they are compatible with your Eco Printer.
How Does the Sublimation Process Work?
Just like any printing process, sublimation starts with the design stage. Coming up with a good design is crucial since the chosen image on the computer is the one that will reflect on the final print.
The design is then printed on a heat transfer paper, also known as sublimation paper. This paper is explicitly used for the transfer of the image when exposed to heat. A sublimation paper uses CMYO colors. Hence, the Sublimation Printer used must also accommodate the same. Luckily, most of the modern printers can alternate between the CYMK and CMYO colors.
It is evident that the “next big thing” in the personalization world is UV printing, but what makes it so great? What can you do with a UV Printer that you can’t do with sublimation or some other color printing method? And finally, is the equipment worth the price?
Before answering this, I should clarify for the benefit of newbie readers what this is. A UV inkjet printer is a lot like the inkjet printers we use to print documents in the office. The main difference is they are designed to print on other substrates besides paper, plus they use a UV light source to cure the inks after they are deposited onto the item/substrate.
I’ve been using a UV printer for a couple of years now and I think I have discovered a fair share of the good and bad points of the process.
First, the bad points: Two come immediately to mind. One is that these printers don’t print on everything. Although some salespeople may make it sound that way, the truth is, there are countless products just begging for UV images but the inks won’t adhere properly. It does print on most things, especially if you use an adhesion promoter. This is usually a liquid that can be applied with a paper towel prior to printing. A couple of UV Roll To Roll Printers on the market actually allow you to install the promotor like an ink allowing you to “print” the liquid prior to printing the ink. Although this may sound like a good idea, I question the wisdom since this would require relinquishing one or two nozzles for this purpose. I would much prefer having those nozzles available for white or clear inks.
Note, too, that dishwashers and microwaves are death to most UV printed items. Although a couple of ink companies are said to be working on inks that will withstand the rigors of a dishwasher, current inks that I’ve seen just can’t cut it. This doesn’t eliminate printing on cups and glassware but it does require a warning label at the very least.
Second, as I have pointed out in previous articles on this subject, these printers require a lot of attention compared to most of the other equipment you might have in your shop. Lasers, rotary engravers and sublimation equipment all stand maintenance free when not in use but this is not the case with a UV Flatbed Printer. I have made a rule that I print something every single day, without fail, to keep the heads clear of clogs.