How Does a Metering Pump Work?

[Koipdd69]

Metering pumps, also called dosing pumps, are pumps that are designed to dispense specific amounts of fluid and measured flow control. They use expanding and contracting chambers to move the liquids. Metering pumps also have a high level of accuracy over time and can pump a wide range of liquids including corrosives, acids, and bases, as well as slurries and viscous liquids. They are used in various industries like manufacturing, agriculture, and medicine. There are a variety of types of metering pumps that work in different ways. For the purposes of this post, we’ll look at diaphragm and peristaltic metering pumps.

How Diaphragm and Peristaltic Metering Pumps Work

Pressure and back pressure
High pressures are no problem in metering systems as long as there is something to counter them. ProMinent hydraulic diaphragm metering pumps therefore use a hydraulic fluid to create back pressure. The benefits this brings to the diaphragms become evident very quickly.
The industries in which ProMinent’s hydraulics technology is used:

• Oil/gas production (onshore/offshore)
  Pump GuideThe choice of pumps is huge: 80 industries, 100,000 products and infinite applications. To make it easy to find your ideal metering pump, ProMinent designed the Pump Guide. In just a few clicks you will find a selection of suitable models.Here’s how it worksSmall-scale reverse osmosis plants that can produce less than 50 m 3 /d are vital for small communities in villages located in remote areas. The design parameters of such plants involve low flow rate and high-pressure feed. For such operating conditions, reciprocating pumps are more favorable than centrifugal pumps because the efficiency of centrifugal pumps in such conditions is reduced extensively. Recently, reciprocating pumps with energy recovery are presented by several pump companies for desalination applications. The concept of energy recovery in these pumps is quite similar to that used in pressure exchangers. In these pumps, the pressurized brine is directed to the back of the pumping pistons which reduces the pumping motor required power. This work presents a numerical simulation and experimental analysis for such pumps. The numerical simulation includes a computational fluid dynamics transient analysis for the used pump. The analysis is presented using both two-dimensional and three-dimensional models. The effects of the operational and design parameters on the performance of the pump and its volumetric efficiency are investigated. The results show that increasing the valve spring stiffness increases the volumetric efficiency. It also shows that increasing the outlet pressure and piston speed reduces the volumetric efficiency. The most striking result to emerge from the data is that reducing the valve spring stiffness below a specific value results in large reduction on the volumetric efficiency. Results of high-pressure reciprocating pump’s testing at different operating conditions are evaluated. The results of the presented numerical simulation were compared with the experimental results at several operating conditions, and the deviation was less than 10%.What is a pneumatic diaphragm pump? An air operated double diaphragm pump is a pneumatic pump that uses a patented air valve that directs compressed air between two sides of the pump, back and forth. It can operate on regular compressed air, clean dry air, nitrogen, or even natural gas.