+- Osborne Acres Community (https://osborneacres.com)
+-- Forum: My Category (https://osborneacres.com/forumdisplay.php?fid=1)
+--- Forum: My Forum (https://osborneacres.com/forumdisplay.php?fid=2)
+--- Thread: How to Maintain Your Dust Collector (/showthread.php?tid=890)
How to Maintain Your Dust Collector - titokd5 - 10-13-2021
To ensure dust collector bags are functioning properly, you need to perform periodic inspections, as well as repair and replace damaged or malfunctioning equipment. A routine inspection and maintenance program will boost your equipment's performance and life. To maintain the health and effectiveness of your dust collector, follow our helpful list of procedures.
1. Create an inspection/maintenance program — A typical program consists of a schedule for periodic inspections that are performed on a daily, weekly, monthly, semi-annual and annual basis. Failing to periodically inspect the dust collector can hurt its performance. Subsequently, the dust collector may not meet EPA outlet emissions standards.
The welding of the filter bag cage is not standardized. The unevenness of the welding frame of the filter bag cage or friction with the cabinet will cause the dust filter bag to be worn out during shaking. Generally, the uneven surface of the filter bag cage refers to burrs or edges at the welding place;
The dust bag installation is not standard. The dust filter bags are too loose when suspended, which may cause the dust filter bag to collide or friction with other components, resulting in damage to itself;
The disassembly and assembly of the dust filter bag is not standard. When the dust filter bag is disassembled or installed, it is likely to collide with metal edges and wear the cloth bag. This kind of injury is not easy to detect, but ash will appear during work;
The general process of developing any filter media should begin by identifying the application requirements. Then specifications are determined for not only the finished media grade, but for the final filtration product in which the dust filter media grade will be incorporated (i.e. cartridge, panel, or filter pack).
Factors to be considered in media recipe formulation include: a cost level which makes sense for the market; minimum efficiency levels needed to achieve acceptable emissions; the type and amount of material being filtered from the fluid stream by the media filter; and the physical environment to which the media will be exposed. Other factors include: pressure, vibration, temperature, humidity, and chemical composition of contaminants.
Some manufacturers are so serious about providing exactly what the customer needs they offer hundreds of choices to the market, each tailored to meet specific challenges and requirements. If an appropriate media does not exist for an application, new media development may be undertaken.
#5: Evaluating dust collection manufacturers pays off.