+- Osborne Acres Community (https://osborneacres.com)
+-- Forum: My Category (https://osborneacres.com/forumdisplay.php?fid=1)
+--- Forum: My Forum (https://osborneacres.com/forumdisplay.php?fid=2)
+--- Thread: When to use Steel vs. Fiberglass Grating (FRP) (/showthread.php?tid=1011)
When to use Steel vs. Fiberglass Grating (FRP) - Ouopio27 - 01-04-2022
Steel is stronger, more durable, and more economical than fiberglass. It is required for grating that must withstand heavy loads, such as vehicular traffic. For elevated platforms and flooring, steel is the safer choice. Slip-resistant coatings and treads can be applied to steel grating for stairways and walkways. Steel Grating can also offered in a serrated surface for more traction. Buyers who require corrosion resistance can choose stainless steel grating over carbon steel.
Steel is more environmentally friendly than fiberglass. Fiberglass is constructed from reinforced fiberglass plastic that releases VOCs (Volatile Organic Compounds), which, at high volumes, are harmful to human health and indoor air quality. As most fiberglass products are imported, carbon emissions are released to transport them overseas. Furthermore, while Steel Bar Grating can be recycled, fiberglass cannot. In addition, since the integrity of fiberglass products can be compromised over time as the plastic is exposed to UV radiation, the grating is difficult to reuse or repurpose.
Stairs are usually just seen as a way to move between levels, not as a decorative element of their own. But stairs comprise enough interior space that they deserve to be decorated, too. You can inexpensively improve the appearance of your stairs and help them function as design elements with covers, runners, paint, or tile. The Stair Treads are the horizontal surface that your walk on when you go up or down the stairs. The stair riser is the vertical portion between the treads. Not all staircases have risers.Trench cover advantages
Trench Cover is a flexible, sturdy solution that can be implemented on construction sites to prevent workers from falling into ground holes.
Grating Fasteners (also known as Grating Clips and G-Clips) are simple fasteners that allow bar grating to be attached to steel structures without the need for drilling or welding. There are many advantages to using grating fasteners. Grating fasteners are safer because they don't require dangerous welding or drilling. This is also perfect for industrial environments where drilling and welding is not allowed. In many cases there is no stoppage of work and no special permits which save real time and money.
Grating Clip grating fasteners are also very easy to install. Each connection can be made in just minutes using simple hand tools. Beyond easy of installation, and unlike traditional bar grating attachment methods, the grating fastener can be removed to allow access to areas below the grating. Whether used for temporary or permanent installations of bar grating, you'll appreciate the ability to remove the fastener.