Indoor Gardening isn’t exactly a new thing, but LED’s are changing the way we light our indoor gardens.  LED lights are more efficient than traditional fluorescent and incandescent lights.  That’s because LED lights convert nearly all of their energy (95%) into light, while other lights turn a significant amount of energy into heat.  But, there’s another very important reason that LED’s are more efficient when it comes to growing plants.  With LED lights, we have the rather unique ability to customize the type of light that is emitted, and that means we’re not wasting energy to create light that doesn’t help our plants grow.  At the end of this article, you’ll understand the science behind why spyder grow light series come in many different colors, as well as why some LED grow lights cost so much more than others. 

Plants Only Use the Visible Light Spectrum for Photosynthesis

It’s important to know that plants only use visible light (the colors of light that we see every day) for photosynthesis. However, as the chart below demonstrates, the complete spectrum of light is far greater than just the visible light spectrum.  On the outer edge of the visible light spectrum is Ultraviolet (UV) light and Infrared Radiation (IR).  UV light is the invisible light emitted by the sun and other sources that will cause sunburns when we don’t wear sunblock.  IR light can only be seen with special equipment, like night-vision goggles.  Even further out from the visible light spectrum are light waves that we don’t traditionally think of as light.  These include X rays, Microwaves and even Radio Waves.

One of the most important things to understand is that scientists have demonstrated over and over again that plants only absorb visible light for photosynthesis.  Plants do react to other forms of light like UV, but that reaction is typically negative.  I’m told that marijuana growers actually use UV light to induce the production of psychoactive chemicals like THC, which seem to be produced in part as a defense mechanism against the damaging effects of UV light to the plant.

What is PAR?

PAR stands for “photosynthetically available radiation.”  PAR is made up only of visible light, because this is the only light that plants use for photosynthesis.

For decades, many indoor growers have used Lumens to measure a grow light’s efficacy, but the industry is getting smarter and turning to PAR.  Lumens are used to measure the brightness of a lamp to the human eye.  But plants and people see light differently.  Humans see yellow and green more brightly than other colors.  Therefore, yellow and green lamps may have higher Lumen values than red and blue lights that put out just as much actual light, and which plants are likely to respond better to.

PAR measures all light from the visible light spectrum equally, and does not measure light outside of the visible light spectrum, which does not help the plant photosynthesis.  So, for plants, the PAR value of a light is currently the best basic measurement of a grow light’s brightness.  Accurate PAR meters are quite expensive and generally cost $500 or more.  Inaccurate PAR meters can be purchased for much less, but there’s really no point to owning an inaccurate PAR meter. 

The best way to get PAR values for your 400W LED grow light, assuming you don’t want to purchase your own PAR meter, is to check with your reputable grow light manufacturer or provider for the PAR rating of their lights. 

How Much PAR do My Plants Need to Grow?

The amount of PAR your plants require depends on what you are growing, as well as how far away from your plants the light is.  Generally speaking, leafy greens like lettuce only need a PAR value of ~200, whereas tomatoes and other plants that flower and produce fruit require 400-500 or more PAR.  Unless you place your 600W LED grow light right on top of your produce, you will need an even higher PAR rating from your grow light, to take into account the distance between your plant and the light source.

In the example below, you can see a very powerful grow light that puts out nearly 1,900 PAR (measured in umol) 8 inches from the source.  Very few lights put out this much PAR, and they are typically quite expensive.  This light will emit 1,900 umol every second.  But at 23 inches from the source, the strength of the light is reduced to 890 umol.  The PAR value is reduced further and further as you get further from the light source.  When we get to 6 feet away from the light source, our PAR value is down to ~100umol, which means we would have trouble growing even lettuce well.  So, always make sure you understand not just the PAR emitted from the light, but that every 8 inches or so away from your light, the PAR value will be reduced by ½ or more.

There are many inexpensive grow lights on the market that make big claims, but they will ultimately leave their owners disappointed.  This issue is especially rampant on the internet.  Remember to check the PAR value of any light you purchase.  Also, remember to take into account how far your light will be from your plant to ensure there is enough photosynthetically available radiation (PAR) for your plant to flourish.

Leafy Greens require 200 PAR for proper growth
Tomatoes, cucumbers and other flowering/fruiting vegetables require 400-500 PAR
Fruiting Trees should be given 600 PAR or more
What is the Temperature of Light I Should Use?

Interestingly, ‘Kelvin temperature’ is the metric used to describe the visual color that a light emits.  As you can see in the chart below, ‘warmer’ light temperatures that have a red color have a lower Kelvin rating.  On the other end of the spectrum are ‘cooler’ temperature lights which have a blue color and higher Kelvin rating.

Different temperatures of light have different impacts on plants.  Generally, higher temperatures (blue) light encourages photosynthesis which leads to bushy plants that don’t feel inclined to elongate and reach for more light.  This is great if you want to grow in a compact space.  Lower temperature (red) light reduces photosynthesis and signals to plants that that it’s time to flower and produce fruit.  Plants put under a red light will also be more inclined to stretch and grow taller, as opposed to growing bushier and more compact.

IGWorks focusses on providing full spectrum lights with a natural color temperature of between 4500K-6500K as these are most pleasing to the eye.  They also allow plants to grow bushy and compact, without hindering the ability of plants to flower and fruit. 

What Color of Light Should I Use?

LED lights can come in almost any color.  Plants respond most to red and blue light.  Interestingly, plants generally respond less well to green light.  In fact, the reason that plants appear to be green is that they tend to reflect green light, while they absorb other parts of the light spectrum more readily.  This is why a large scale or industrial grower of plants will often use a combination of red and blue lights to photosynthesize their plants.  They don’t want to waste electricity producing green and even yellow light, which plants use less effectively. 

However, for those of us growing produce in our living spaces, it’s probably worth the extra pennies it costs to produce a nice full-spectrum color that will be more natural and pleasing to the eyes.  Full-spectrum grow lights will often come with a chart, which shows the distribution of blue, green, yellow and red light that is emitted.  See the example below

Choosing the right grow light spectrum for your commercial operation can be a challenge. Many 800W LED grow light suppliers have conflicting information on the topic due to bad marketing or simply a lack of knowledge in plant and light research.

In this article, our light spectrum experts break down what light spectrum is, how plants respond to light, and how light spectrum influences plant growth.

What is Grow Light Spectrum?
Light spectrum is the range of wavelengths produced by a light source. When discussing light spectrum, the term ‘light’ refers to the visible wavelengths of the electromagnetic spectrum that humans can see from 380–740 nanometers (nm). Ultraviolet (100–400 nm), far-red (700–850 nm), and infra-red (700–106 nm) wavelengths are referred to as radiation.

As growers, we’re most interested in the wavelengths that are relevant to plants.  Plants detect wavelengths that include ultraviolet radiation (260–380 nm) and the visible portion of the spectrum (380–740 nm) which includes PAR (400–700 nm), and far-red radiation (700–850 nm).

When considering light spectrum for horticultural applications, greenhouse and indoor environments will differ.  With indoor environments your grow light’s spectrum will account for the total light spectrum that your crop receives.  Whereas in a greenhouse you must consider that your plants are receiving a combination of folding grow light series and solar spectrum.

Either way, the amount of each waveband that your crop receives will have significant effects on growth.  Let’s learn more about how this works.

Plants use light for photosynthesis and photomorphogenesis. Photosynthesis is the process by which plants and other organisms convert light energy into chemical energy. Photomorphogenesis refers to how plants modify their growth in response to light spectrum.

One example of photomorphogenesis is a plant bending toward a light source. Light also affects plants’ developmental stages, such as germination and flowering.

The light that plants predominately use for photosynthesis ranges from 400–700 nm. This range is referred to as Photosynthetically Active Radiation (PAR) and includes red, blue and green wavebands.

Photomorphogenesis occurs in a wider range from approximately 260–780 nm and includes UV and far-red radiation.

Although results are dependent on other factors, there are general rules of thumb that you can follow when using light spectrum to elicit different plant responses.

Outlined below is an overview of how each waveband is used for horticultural purposes so that you can trial light spectrum strategies in your own growth environment and with your chosen crop varieties.

Blue light has distinct effects on plant growth and flowering. In general, blue light can increase overall plant quality in many leafy green and ornamental crops.

A minimal amount of blue light is required to sustain normal plant development.  In terms of adjustable spectrum lighting strategies, if we were to equate red light to the engine of your car, then blue light would be the steering wheel.

When combined with other light spectrum wavebands, blue light promotes plant compactness, root development, and the production of secondary metabolites.   Blue light can be utilized  as a growth regulator, which can reduce your need for chemical plant growth regulators (PGRs). Blue light can also increase chlorophyll accumulation and stomatal opening (facilitating gas exchange), which can improve overall plant health.

One example of blue light influencing secondary plant metabolite production is how blue wavebands promote anthocyanin development in leaves and flowers. Increased anthocyanin levels result in more pronounced color.

Blue light also promotes other secondary metabolic compounds associated with improved flavor, aroma and taste. For example, blue light treatments have been shown to improve terpene retention in some varieties of cannabis.

Higher intensities of blue light (>30 μmol·m-2·s-1) can inhibit or promote flowering in daylength-sensitive crops. Blue light does not regulate flowering at low light intensities (<30 μmol·m-2·s-1), so is safe to be applied at night to influence the other plant characteristics listed above

Since chlorophyll does not absorb green light as readily as other wavelengths, many have written off the green waveband as being less important to plant growth. This lower chlorophyll absorption rate, compared to blue and red light, is what makes most plants appear green. Depending on the plant, leaves generally reflect 10-50% of green waveband photons.

In contrast to assumptions, studies of green light in crop production have concluded that green light is important to photosynthesis, and especially in a plant’s lower leaves. Around 80% of green light transmits through chloroplasts, whereas leaves absorb approximately 90% and transmit less than 1% of red and blue light.

So what does this all mean? When light is plentiful, chlorophyll reaches a saturation point and can no longer absorb red and blue light. Yet, green light can still excite electrons within chlorophyll molecules located deep within a leaf, or within chloroplasts lower in the plant’s canopy. And so, green light enhances photosynthetic efficiency—potentially increasing crop yields, during bright light conditions.

Additionally, the ratio of green to blue and red wavelengths signals to the plant a leaf’s canopy position. This can induce morphological changes to maximize light absorption. Green light also plays a role in regulating stomatal aperture (opening and closing of plant pores that make gas exchange possible).

Greenhouse applications require less supplemental green light since plants receive adequate green light from solar radiation.  Indoor environments may benefit more from supplemental green light since no sunlight is present.

As we’ve touched on here, there are myriad uses for screw air compressor both in commercial and domestic environments. Within the category of air guns, there are several types, each of which is suitable for a different job. We’ve compiled a guide to all the major types of air compressor, how they work and how they differentiate from one another.
The most common types of regular screw air compressor are single and dual phase, both of which operate in the same fundamental way, only dual phase has one more step involved in the compression process. In a single phase compressor, there is one chamber and the air is compressed a single time; in a dual phase, there are two chambers and the air is put through compression twice.
Be careful not to confuse single and dual phase compressors with the number of cylinders a compressor has. Both types of compressor use two cylinders; one-cylinder compressors are less common, because air balancing is made easier with two cylinders. The difference between single and dual stage compressors is that in the former the cylinders are both the same size; in the latter they are different sizes.
Oil-Free vs. Oil-lubricated Air Compressors
Another way to compare variable frequency air compressor is to look at whether they use oil or not – there are oil-free and oil-based / lubricated compressors and both are suited to slightly different jobs. For the air to be drawn into the chamber safely and effectively, the piston needs to be in top working order. To work properly, the piston must be lubricated with oil.
Within an industrial or commercial setting, there are numerous uses for oil-based PM screw air compressor, including:
Vehicle painting and repairs
Sanding and woodwork
Creating snow banks in ski centres
Tools within dentistry and other medical environments
Pneumatic construction tools such as nail guns
Air cleaning tools such as blowgunsScroll compressors are a type of piston compressor, and are also called reciprocating compressors. These are the most common type of two stage air compressor, due to affordability and general availability. But how does a reciprocating air compressor work? The piston system works by having a piston travel downwards, decreasing the pressure inside its internal cylinder through the creation of a vacuum. The sudden change in pressure causes the door of the cylinder to be forced open, and draw air in. When the piston travels up again, the air is forced out of the cylinder at a much higher pressure point. This continues in a reciprocating, ‘scroll’ pattern, hence its name.

Keywords: Air cleaner, Air filter, Air filtration, Breathing zone, CADR, Clean air delivery rate, Environmental control, Furnace filter, HEPA, HVAC, Indoor air, Indoor allergens, Intervention measures, Ozone, Particulate matter, PM, Room air cleaner, Sleep breathing zone, Ventilation, Whole house filtration

The pharmaceutical package market is constantly advancing and has experienced annual growth of at least five percent per annum in the past few years. The market is now reckoned to be worth over $20 billion a year. As with most other packaged goods, pharmaceuticals need reliable and speedy packaging solutions that deliver a combination of product protection, quality, tamper evidence, patient comfort and security needs. Constant innovations in the pharmaceuticals themselves such as, blow fill seal (BFS) vials, anti-counterfeit measures, plasma impulse chemical vapor deposition (PICVD) coating technology, snap off ampoules, unit dose vials, two-in-one prefilled vial design, prefilled syringes and child-resistant packs have a direct impact on the packaging. The review details several of the recent pharmaceutical packaging trends that are impacting packaging industry, and offers some predictions for the future.

The best soft close drawer slides will open easily, close smoothly and be certified for durability. But unfortunately finding a brand name slide that works properly isn’t easy. And, since soft close slides require precision installation, there are a few tools you MUST purchase for proper installation. In this article learn what the best drawer slides are for your projects – and what you need to install them.
While some top brands like Accuride dominate in self closing under mount slides(that are not soft closing!), they just didn’t perform as well as others.
So, based on my reviews and use, here are the top three choices for your next project.Curiously, this slide had the #1 issue with side mount ball bearing slides: it opened loud. While most high quality slides have extra “bumpers” to ensure 3 tracks don’t do this my test showed a louder than average click.
Drawer screws sent by most manufacturers are inadequate. So, I use Rok #8 truss head screws in both drawer European slides and soft close cabinet hinges as they have a superior hold. 
So, add these 3 to your shopping list and you’ll experience a MUCH SMOOTHER installation.
Don’t want hardware on the front of your drawers? 17mm ball bearing slides as you can see from the image above are completely different to Roller slides. These make use of ball bearings encased in a bearing cage so they don't fall out, and some models offer a telescopic motion. By telescopic we mean that the Rails have 3 or more members that once combined together are able to extend the same distance or more than their total closed length. This great use of space is what gives them such a great appeal because the drawers are then able to slide out 100% of the drawers depth in a cabinet, where-as using a roller slide you can typically only achieve around 75% opening. 

The sink and faucet area is one of the most-used in any kitchen, and are often treated as a design focal point for the room. Upgrading your kitchen faucet is an easy and economical way to give your space a quick design refresh, or complement a whole kitchen transformation. A new faucet changes the look of the whole space. Be smart about the choice so that you find the best fit for your home and know what to look for before you buy.
It’s no surprise that the kitchen faucet is one of the most well used items in the room, but what might be news is how many improvements have been made to this simple fixture. There are many more options than just the selection of comfortable handles for the hot and cold water lines. It’s a good idea to explore the different styles, finishes, and features that are available when selecting a new faucet. The right design will look great for years, and add to the value of your home - all while meeting the demands of your busy kitchen. Take a broader view of what the options are and bring home the best fit.
In a counter- or deck-mounted installation, drinking faucets can be mounted on the counter or sink edge. Deck mounted is the more common style, and it helps draw attention to the sink as a design element in your kitchen. Here you’ll find the largest variety of faucets, ranging from single-hole mounts to up to three-hole mounts, in all sizes and finishes.There isn’t much to be done with a stainless sink faucet; the entire purpose of it is as a water source, and the water is either on or off, right? Not exactly. The shape of the faucet changes from one design to another, and companies like Moen, Delta, Brizo, and Kohler are constantly looking to improve how the kitchen faucet interacts in the home. It started with the basics, like the side spray and the pull-down faucet. Now, technology-savvy companies have even wondered: why should you have to dirty up the finish with soapy fingerprints when waving a plate under the faucet could turn the water on? And their ideas and solutions improve year after year, all to make the kitchen life a little easier with a wide variety of standard features to choose from.Finally, one of the most important details when selecting a brushed stainless kitchen faucet is choosing the perfect finish. The finish determines the color and durability of the faucet for years to come. From stainless steel, to copper, to modern black, the finish can be found in a variety of metals and colors to coordinate with the accenting colors of your kitchen hardware and appliances. Newer finishes are designed specifically to resist the oils of fingerprints and smudges, making it easier to keep clean and helping to keep your family healthy. As it turns out, it’s even okay to mix metals in your home decor, so go with the style that you like.

Learn about the standard iron padlock to understand the main parts, how they work and also how to bypass the mechanical security features to pick the lock.
With thanks to Squarespace for sponsoring this article. Go to Squarespace.com for a free trial and when you’re ready to launch, go to http://squarespace.com/engineeringmin… and add code “ENGINEERINGMINDSET” at checkout to save 10% off your first purchase of a website or domain.
When we look at a padlock the most noticeable feature is the U-shaped shackle at the top. In the unlocked position, one end of the shackle pops out of the main body allowing this component to rotate freely. On the inside surface of the shackle we will find two notches. These form part of the lock mechanism and we’ll see that part shortly.
To lock the brass padlock we simply align the end of the shackle with the hole in the lock body and push these together. You’ll feel the internal locking mechanism engage and click into place, the shackle will now be unable to leave the body of the lock. To unlock the padlock we need to insert the correct key into the key hole at the bottom of the lock body, and rotate the key until it releases the shackle.
40mm Personalized Engraved Love Lock
The solid brass 40mm engraved disc padlock is a beautiful design with a permanent message engraved in bold letters. You can see the writings under most lighting conditions.These charming engraved heart lock engraved laminated padlock will melt your heart once you set your eyes on them. They have the most romantic message engraved on them. You can easily customize them with the type of message you want. In most cases, the message will either be just what you wanted to convey or will be beyond your expectations. They also come in the most endearing colors, light pink, shiny grey, silver, gold, e.t.c.
The engraved weatherproof padlock comes in a dominant silver-white color, sleek design measuring between 1.75” by 1.40” by 4.0” in height. You can also purchase the product enclosed in a gift box and a bow ribbon for a more personalized touch. The Silver Tone Heart Shaped love lock is suited for gifts, birthday presents, and on special occasions.
Vintage Copper Engraved Padlocks

This article presents facts and figures on mining equipment safety and reviews various important aspects of mining equipment safety including quarry accidents, electrical accidents, equipment fires, maintenance-related mining accidents, causes of mining equipment accidents and major ignition sources for mining equipment fires. A number of methods considered useful for performing mining equipment safety analysis are also presented. Useful strategies to reduce mining equipment fires and injuries, guidelines to improve electrical safety in the mining industry, and human-factor-related tips for safer mining equipment are discussed.

Somando-se à linha adidas Originals de Tyler “Ninja” Blevins, Adidas Homens está um novo colorway “Core Black” de seu “Time In” Nite Jogger. Esta oferta do adidas Nite Jogger apresenta uma base de malha preta com sobreposições de couro cinza. Rosa e azul contrastando com detalhes, renda “Time In” dubraes sobre uma entressola Black Boost completam o design.


A Adidas Originals expandirá sua linha Nite Jogger com um novo colorway “Sunset”. Esta Adidas Preto oferta do adidas Nite Jogger apresenta uma base de malha preta com sobreposições de camurça. Destacando o sapato estão os detalhes iridescentes nas Três Listras e os saltos completados com uma entressola gradiente tipo Sunset Boost.


A Adidas Originals está pronta para lançar alguns novos novostocks para começar o mês de junho. Um deles inclui esta nova oferta “Signal Green” que vem construída com uma base de malha, sobreposições de couro e detalhes reflexivos 3M. Um design gradiente decora a entressola Boost acolchoada em cima de uma sola de borracha preta.


Além disso, “Core Black” aparece por Adidas Nite Jogger Grey Three/Collegiate Royal baixo do bando de verdes fluorescentes e amarelos em todo o antepé, o meio do pé e o calcanhar em um arranjo parecido com bolinhas. Estruturas traseiras em amarelo desbotado também apontam para a parceria da adidas com a 3M, que fornece os acentos reflexivos que tornam esta silhueta os "criadores noturnos". Em outro lugar, um gráfico de código de barras “Signal Green” e uma combinação de entressola Boost “Core White” / ”Core Black” completam o par.


https://www.novostocks.com/

L'aggiunta alla linea Adidas Scarpe di Tyler "Ninja" Blevins è una nuovissima colorazione "Core Black" del suo "Time In" Nite Jogger. Questa offerta dell'adidas Nite Jogger presenta una base in rete nera con rivestimenti in pelle grigia. Accenti contrastanti rosa e blu in tutto, dubraes in pizzo "Time In" in cima a un'intersuola Black Boost completano il design.


Adidas Originals amplierà la sua gamma Nite Jogger con una nuova colorazione "Sunset". Questa Adidas Donna offerta dell'adidas Nite Jogger presenta una base in rete nera con strati esterni in pelle scamosciata. Evidenziando la scarpa sono i dettagli iridescenti sulle tre strisce e sui talloni completati con un'intersuola sfumata Boost simile al tramonto.


Adidas Originals lancerà alcune nuove colorazioni sincescarpe per dare il via al mese di giugno. Uno di questi include questa nuova offerta "Signal Green" che viene costruita con una base in rete, rivestimenti in pelle e dettagli riflettenti 3M. Un design sfumato decora l'intersuola ammortizzata Boost su una suola in gomma nera.


Inoltre, Adidas Nite Jogger Cloud White fa capolino da sotto lo stuolo di verdi e gialli fluorescenti su avampiede, mesopiede e tallone in una disposizione a pois. Anche le deboli strutture posteriori gialle fanno un cenno alla partnership di adidas con 3M, che fornisce gli accenti riflettenti che rendono questa silhouette la scarpa "creatrice della notte". Altrove, una grafica con codice a barre "Signal Green" e una combinazione di intersuola Boost "Core White" / battistrada "Core Black" completano la coppia.


https://www.sincescarpe.com/